HOLES AND SLOTS NEAR BEND LINE NOT DISTORT

BECAUSE THE WINGS FULLY SUPPORT THE MATERIAL ADJACENT TO THE BEND LINE,
DURING FORMING, HOLES AND SLOTS NEAR BEND LINE WILL NOT DISTORT.

V DIE		WING BEND
			USING WING BEND, HOLES WILL NOT DISTORT AFTER BENDING.
V25 X 88 DEGREE�iSPHC 3.2T�j		WB650(SPHC 3.2T)
			NO SWELLING IN USING WING BEND.
V10 X 88 DEGREE�iSPCC 1.6T)		WB230(SPCC 1.6T)
			TAPPED HOLES WILL NOT DISTORT EITHER.

BENDING SAMPLES BY WING BEND

|TOP PAGE|